Home » DIY » DIY: TV Stand

DIY: TV Stand

tv-stand

What I used

1. wood glue

2. hinge and two knobs

3. compressor, nail and nail gun

4. 5 =8′ lengths of 1 x 4″ board (top and bottom frame)

5. pine shop shelving (4′ for bottom)

6. hand jigsaw, mitre and table saw

7. three 8′ 1 x 2 (doors) I used 1 x 4 cut in half

8. 1/4″ plywood for doors and back to close behind the doors and drawer space

This was the first time I did this project without help except when I put the doors on. I used a drawer and attachments I had saved from a previous project so that was easy. I made the centre work with the drawer.

Advertisements